Electrical Systems Inspection — What We Look For

Panels, wiring, outlets, and the hidden hazards behind every wall.

What we check — 12 inspection points

Every item below is checked on every inspection that includes electrical systems.

Main panel condition

Brand, age, capacity, corrosion, burn marks

Wiring type identification

Copper, aluminum, knob-and-tube identification

Circuit breaker function

Proper sizing, double-taps, missing knockouts

Grounding and bonding

Ground rod, bonding straps, equipment grounding

GFCI protection

Bathrooms, kitchen, exterior, garage, basement

AFCI protection

Bedroom circuits per current code requirements

Outlet condition

Polarity, grounding, physical damage

Switch operation

Function, dimmer compatibility, three-way circuits

Service entry

Mast condition, drip loop, meter base

Thermal hot spot detection

Infrared scan of panel and accessible connections

Smoke and CO detectors

Presence, location, age, interconnection

Exterior and garage circuits

Weatherproof covers, GFCI, dedicated circuits

What we find — top 5 issues

The most common electrical systems findings in Ontario home inspections.

Aluminum wiring

$3,000–$15,000

Fire risk at connections requiring ESA remediation

Knob-and-tube wiring

$5,000–$20,000

Ungrounded wiring requiring partial or full replacement

Federal Pioneer panel

$2,000–$4,000

Known breaker failure issues requiring panel replacement

Missing GFCI protection

$200–$800

Code-required protection absent in wet locations

Double-tapped breakers

$300–$600

Two circuits on one breaker creating overload risk

How electrical systems gets inspected — and verified

On site — Physical Inspection

Your RHI certified inspector physically examines every accessible electrical systems component with professional equipment, including moisture detection — plus thermal imaging when the optional upgrade is added.

In the report — Review & Verification

Every photo and reading from the electrical systems inspection is cross-referenced through our reporting system, and every finding is severity-rated before appearing in your report.

Every electrical systems checkpoint. Every inspection.

From $349. Same-day report. 12 electrical systems checkpoints included.

Book Your Inspection →